Three sole shape options to maximize the required performance in each situation. Each shape provides the best shot for the situation, with different features for each loft.
Mid-low CG design with the flat upper back face. The ideal trajectory and the optimal spin at each loft enables stopping power close to the pin.
High CG design which gradually increases the thickness both vertically to the upper blade and horizontally from heel to toe. This helps the ball stay on the face longer even on the upper area strikes and generates appropriate spin.
Three sole shape options to maximize the required performance in each situation.
S-Sole ：The sole easily slips under the ball even on full shots and provides the ideal distance at each loft.
The shape helps the sole easily slip under the ball both on square and open strikes.
The whole sole enhances a bounce effect so that it facilitates a square address and ease of ball strike.
By overlaying the milling pattern on the face, it bites a ball well even on control shots and generates a beautiful spin control performance.
By attaching the aluminium module in the low toe, a higher CG position is achieved. (Loft 54 ~ 60 deg.)
More spin is generated through the upright face at impact, due to its higher CG position.
By enabling the face to open easily and stay in contact with the ball for longer, more spin as well as enhanced playability is achieved.
Delivers low launch angle through the upright loft at impact and high spin by staying in contact with the ball longer on the face. This exclusive shaft designed for the wedge helps distance control and to stabilize the trajectory.
| HEAD MATERIAL/MANUFUCTURING PROCESS | MILD STEEL (8620 / CASTING | MILLED STEEL + ALUMINUM PARTS / CASTING | ||||||||||
| FINISH | NICKEL + CHROME PLATED HALF MIRROR + MIRROR FINISH | |||||||||||
| NO. | 48I | 50I | 52I | 54I | 56-08C | 56-12C | 58-08C | 58-12C | 58-12S | 60-08C | 60-12S | |
| LOFT(DEG) | 48 | 50 | 52 | 54 | 56 | 56 | 58 | 58 | 58 | 60 | 60 | |
| LIE(DEG) | 63.5 | |||||||||||
| Soal type | I | I | I | I | C | C | C | C | S | C | S | |
| BOUNCE(DEG) | 10 | 8 | 12 | 8 | 12 | 12 | 8 | 12 | ||||
| OFF SET(㎜) | 2.0 | 1.8 | ||||||||||
| LENGTH(inch) | 35.3 | 35.0 | ||||||||||
| SWING WEIGHT/TOTAL WEIGHT(G) | ||||||||||||
| VIZARD IB 105 WEDGE | D0/457 | D1/462 | ||||||||||
| DYNAMIC GOLD | S200 | D3/470 | D4/476 | |||||||||
| N.S.PRO 950GH neo | R | D2/443 | D3/449 | |||||||||
| S | D2/446 | D3/452 | ||||||||||
| MODEL | FLEX | LENGTH | WEIGHT(G) | TORQUE(DEG) | TIP DIAMETER (MM) | BUTT DIAMETER (MM) | KICK-POINT |
| 90 | W | 891 | 93.0 | 2.2 | 9.3 | 15.1 | HIGH |
| 105 | W | 107.0 | 1.9 | 15.6 | |||
| 120 | W | 124.0 | 1.8 |
| Name | GR HONMA TR RUBBER 60R WH | |
| Material | Rubber | |
| Weight(g) | 49.2 | |
| Size | 60 | |